Manufacturer
Advance Metalpres Inc. is a manufacturer of indirectly fired hot water heaters based in Richmond, British Columbia, serving customers in Richmond, Vancouver, the Lower Mainland, and across British Columbia and North America. The company produces durable, energy-efficient hot water tanks and heat exchangers constructed with 316L stainless-steel coatings. Advance Metalpres Inc. manufactures a wide range of hot water heating tanks, including heat exchangers, single coil, dual coil, and double wall indirect fired hot water tanks, Kompact series vertical water heaters, horizontal low headroom water heaters, and storage chiller/buffer tanks. Its products are designed to deliver high volumes of hot water quickly, feature an R-value of 16.5 for reduced energy loss, and include fittings that allow for re-circulation lines or aftermarket powered titanium anodes to address smelly water, scaling, and tank life. All products are made in Canada and manufactured in Richmond, British Columbia, and the company emphasizes fine manufacturing guidelines and an expert sales team with HVAC and plumbing experience. Its product line is recognized for reliability among architects, engineers, plumbing wholesalers, and pool and spa outlets throughout North America.
Manufacturer
BC Boiler Services Ltd. is a boiler specialist based in Surrey, British Columbia, Canada, serving commercial and industrial clients. The company carries forward a legacy of years of success in the boiler industry and focuses on installation and service of commercial and industrial boilers. The company’s products include steam boilers, hot water boilers, thermal fluid heaters, temperature control units, custom engineered systems, boiler rooms, and a full range of ancillary equipment. Its services cover boiler and water heater installation, boiler repair, rebuild and maintenance, fireside and waterside cleaning, and gas, steam and pipe fitting and repair for light industrial, heavy industrial and commercial applications. BC Boiler Services Ltd. also provides delivery and disposal of old water heaters, installation of piping systems using cast iron, copper, plastic, rubber and steel pipes, and ongoing post‑sales support and maintenance contracts. BC Boiler Services Ltd. operates manufacturing facilities in Vancouver, BC, Canada for its heat transfer products and ancillary equipment. The company emphasizes maximizing efficiency and reducing carbon footprint, and performs annual inspections in coordination with the B.C. Safety Authority. Its service work is carried out by mechanical engineers and highly trained fitters, reflecting a focus on technical expertise and dependable service.
Manufacturer
Camus Hydronics Ltd. is a manufacturer of gas-fired high efficiency copper tube and stainless steel boilers for residential, light commercial, commercial and industrial applications. Founded in 2000 and located beside Toronto Pearson Airport, the company operates out of a modern manufacturing facility that includes a state-of-the-art testing lab, engineering department, manufacturing and assembly lines, warehouse and parts depot. The company’s product line includes boilers, combination units, water heaters, and heat pumps, with featured series such as the Avenger Series II firetube boiler, Avenger two-pass counter flow fire tube commercial boilers, Dynaforce Series boilers for hydronic heating and domestic hot water, and Valiant-FT Series I counter flow firetube boilers. Camus Hydronics also manufactures replacement parts for most copper finned water heaters and heating boilers and supplies specialty HVAC products, as well as pre-packaged, skid-mounted hydronic boiler solutions. Camus Hydronics highlights over 75 years of collective experience among its design team of engineers, service and management staff, and operates a modern facility with a state-of-the-art testing lab. The company also offers Camus Tech University, providing off-site and factory training courses with hands-on experience on Camus boilers and water heaters, and distributes its products through a coast-to-coast network of knowledgeable and professional distributors.
Manufacturer
Custom Steam Solutions Inc. (CSSI) is an engineering company based in Paris, Ontario, Canada that provides specialized solutions for industrial utilities and process systems. The firm serves sectors such as pharmaceuticals, food and beverage, dairy, hospitals, automotive, paper and pulp, chemical, and other manufacturing industries, with a focus on energy optimization and environmental impact. CSSI supplies and builds boiler house equipment, cogeneration power plants, hot, cold and chilled water systems, and process equipment. Its product range includes blowdown separators and tanks, boilers, deaerators, electrical and mechanical condensate pumps, feedwater tanks, flash tanks, gate valves, heat exchangers, and hot water storage tanks. The company also offers feasibility studies, design engineering, project management, custom build and assembly, installation and commissioning, after-sales service, and automation solutions, including ESA or UL certified control panels. CSSI differentiates itself through its in-house fabrication and electrical capabilities for modular, prefabricated skid packages, water storage tanks, custom sea-can boiler rooms, and process piping, which help reduce on-site time. The company’s shop follows high industry quality standards and holds certifications such as ASME, TSSA, ISN, and ESA. Its automation team builds panels at its Cambridge facility and develops customized PLC programming and online monitoring systems.
Manufacturer
Custom Thermal Applications is a combustion systems company based in the greater Toronto area, with its office in Oakville, Ontario. Founded in 1986, the company serves manufacturers and industrial end users across Ontario, the rest of Canada, the USA, Mexico and overseas. The company designs, manufactures, installs and retrofits combustion systems for industrial process heating, including heat treating ovens, paint drying ovens, ovens and cooking equipment for the food processing industry, burn-off ovens, paint stripping ovens and thermal oxidizers. It provides turnkey industrial water heating systems featuring QuikWater direct contact water heaters, and offers combustion systems and services such as high-efficiency burners, gas igniters, flame scanners, modular valve train components, boilers, custom accessory pump and heat exchanger skids, water temperature control skids, pump skids and control panels. Custom Thermal Applications also supplies and services direct contact water heating systems for applications such as beverage bottling and canning, meat and food processing, concrete manufacturing, vehicle washing, textiles and laundry, and provides Technical Safety and Standards Authority consulting services. Custom Thermal Applications highlights in-house engineering, testing and experimentation capabilities, and long-term relationships with leading component manufacturers as key strengths. The company is the exclusive representative in Ontario for QuikWater direct contact water heaters and represents and services burn-off and paint stripping ovens made by Pollution Control Products in Dallas, Texas. It follows CFIA, CSA, TSSA, NSF and cUL standards, and is affiliated with ProTherm Ltd., a process combustion and HVAC servicing company that installs and services equipment designed and marketed by Custom Thermal Applications.
Manufacturer
Dettson Industries is a Canadian manufacturer and distributor of HVAC and mechanical building products located in Sherbrooke, Quebec. They produce heat pumps, gas and electric furnaces, oil and electric boilers, air handlers, thermostats, and oil water heaters. Their product line includes central ducted heat pump systems, smart duct zoning components, and the Chinook gas furnace, known for its small footprint. Established in 1952, Dettson is recognized for its innovative HVAC technologies, including the "Right-Sized System®" and "HVAC in a BOX®" solutions designed for energy-efficient homes. They are also a member of the CHBA's Net Zero Energy Housing Council.
Manufacturer
Engineered Air is a North American manufacturer based in Calgary that specializes in custom-built heating, ventilation, air conditioning, refrigeration, energy recovery, and cleanroom technologies. Founded in 1966, the company has over 60 years of experience and operates a network of sales offices and manufacturing facilities across the U.S. and Canada. Engineered Air designs and manufactures made-to-order HVAC and cleanroom solutions, including water and air source heat pumps, gas-fired steam humidifiers, direct and indirect fired make-up air heaters, modular pump skids, fan coil units, unit ventilators, vertical and horizontal unit heaters, water-cooled packaged air conditioners, air handling units, thermal storage recovery systems, and UV-C lighting and oxidizer systems. The company also offers low GWP R-454B refrigerant options across its product lines and specialized technologies such as the “Green Burn” burner and integral face and bypass coils. Engineered Air differentiates itself through its vertically integrated manufacturing, ownership of its own technologies and sales offices, and a large manufacturing footprint exceeding 1,100,000 ft² across locations in Calgary, Edmonton, Newmarket, and De Soto. The company emphasizes energy-efficient, sustainable HVAC solutions, holds UL 60335 certification for its R-454B units, and has dedicated cleanroom manufacturing space, including at its new Blackfoot Plant in Calgary with advanced automated sheet metal processing.
Manufacturer
Maxi-Therm Inc is a joint Canadian and American owned company based in Montreal, Quebec, founded in 2004. The company focuses on innovating in heat transfer and provides complete steam solutions for building heat and domestic hot water applications. Maxi-Therm manufactures high-efficiency steam-to-liquid vertical flooded units and steam-to-water heat exchanger technology, including vertical heat exchangers, control valves, pumps, and accessories. Its packaged steam-to-liquid solutions are used for building heat units, domestic hot water heaters, steam-to-steam humidification, and quality steam packages for sterilizers. The company differentiates itself through patented design concepts, including an international patent for its Zerolag design, and by integrating a steam motor to generate free electric power. Maxi-Therm has four manufacturing and engineering facilities totaling 15,000 sq ft, one of which meets ISO 9001 quality management standards, and has installed over 450 steam-to-liquid packaged solution units for notable clients across government, universities, hospitals, district energy systems, pharmaceuticals, food processing, and tall buildings.
Manufacturer
SPX Technologies is a diversified industrial company operating through HVAC and Detection & Measurement segments, with a verified facility listed as S P X Flow Technology in Brockville, Ontario. The company manages a portfolio of niche brands that support engineers, owners, and contractors in critical environments. Its HVAC-related offerings include industrial fans and blowers, critical exhaust systems and dampers, custom air handling solutions, cooling towers, fluid coolers, evaporative condensers, adiabatic cooling systems, dry coolers, industrial and commercial electric heaters, supplemental electric heat, commercial boilers, water heaters, heat pumps, and hydronic heating and cooling equipment. In Detection & Measurement, SPX provides underground cable and pipe locators, leak detection and ground-penetrating radar equipment, water and wastewater inspection equipment, marine lighting and buoys, port entry and lighthouse systems, RF communication and spectrum monitoring systems, airborne data links, RF inhibitors, digital interoperability and countermeasure systems, and mobile ticketing and fare collection technologies. SPX Technologies highlights a market-leading portfolio of trusted niche brands that set standards for HVAC system design and specialized detection and measurement applications, and it continues to expand capabilities through acquisitions such as Crawford United’s commercial air-handling segment and Thermolec’s custom electric duct heating solutions.
Manufacturer
Viessmann Manufacturing Company ULC is a leading manufacturer of high-efficiency heating and renewable energy systems serving the Canadian market. The company operates through its Canadian website, viessmann.ca, and focuses on providing heating solutions for both homeowners and professionals. Viessmann’s product range includes condensing gas boilers such as the Vitodens 100-W and Vitodens 200-W, the Vitocrossal 300 CA3B gas condensing boiler for commercial buildings, and Vitocell 300-V domestic hot water tanks. The company also offers Vitocal heat pumps, mobile apps, and smart home solutions that enable connectivity, remote monitoring, and control of heating systems. Viessmann emphasizes premium quality heating solutions, high efficiency, renewable energy systems, and industry-leading design and innovation. Its integrated digital tools and focus on connectivity are positioned to deliver comfort, peace of mind, and future-proof heating solutions for residential and commercial applications.